10Base2 - Ethernet specification for
thin coaxial cable, transmits signals at 10 Mbps
(megabits per second) with a distance limit of
185 meters per segment.
10Base5 - Ethernet specification for
thick coaxial cable, transmits signals at 10
Mbps (megabits per second) with a distance limit
of 500 meters per segment.
10BaseF
- Ethernet specification for
fiber optic cable, transmits signals at 10 Mbps
(megabits per second) with a distance limit of
2000 meters per segment.
10BaseT - Ethernet specification for
unshielded twisted pair cable (category 3, 4, or
5), transmits signals at 10 Mbps (megabits per
second) with a distance limit of 100 meters per
segment.
1000BaseTX -Ethernet specification for
unshielded twisted pair cabling that is used to
trasmit data at 1 Gbps (gigabits per second)
with a distance limitation of 220 meters per
segment.
Asynchronous Transfer Mode (ATM) - A
network protocol that transmits data at a speed
of 155 Mbps and higher. It is most often used to
interconnect two or more local area networks.
AppleTalk - Apple Computer's network
protocol originally designed to run over
LocalTalk networks, but can also run on Ethernet
and Token Ring.
AUI Connector (Attachment Unit
Interface) - A 15 pin connector found on
Ethernet cards that can be used for attaching
coaxial, fiber optic, or twisted pair cable.
Backbone - A cable to which multiple
nodes or workstations are attached.
Bit -
Binary digit in the binary
numbering system. Its value can be 0 or 1. In an
8-bit character scheme, it takes 8 bits to make
a byte (character) of data.
BNC Connector (Bayone-Neill-Concelman)
- Standard connector used to connect 10Base2
coaxial cable.
Bridge - Devices that connect and pass
packets between two network segments that use
the same communications protocol.
Cable - Transmission medium of copper
wire or optical fiber wrapped in a protective
cover.
Client/Server - A networking system in
which one or more file servers (Server) provide
services; such as network management,
application and centralized data storage for
workstations (Clients).
CSMA/CA - Carrier Sense Multiple
Access Collision Avoidance is a network access
method in which each device signals its intent
to transmit before it actually does so. This
prevents other devices from sending information,
thus preventing collisions from occurring
between signals from two or more devices. This
is the access method used by LocalTalk.
CSMA/CD - Carrier Sense Multiple
Access Collision Detection is a network access
method in which devices that are ready to
transmit data first check the channel for a
carrier. If no carrier is sensed, a device can
transmit. If two devices transmit at once, a
collision occurs and each computer backs off and
waits a random amount of time before attempting
to retransmit. This is the access method used by
Ethernet.
Coaxial Cable - Cable consisting of a
single copper conductor in the center surrounded
by a plastic layer for insulation and a braided
metal outer shield.
Concentrator - A device that provides
a central connection point for cables from
workstations, servers, and peripherals. Most
concentrators contain the ability to amplify the
electrical signal they receive.
DIN - A plug and socket connector
consisting of a circular pattern of pins in a
metal sleeve. This type of connector is commonly
seen on keyboards.
Dumb Terminal - Refers to devices that
are designed to communicate exclusively with a
host (main frame) computer. It receives all
screen layouts from the host computer and sends
all keyboard entry to the host. It cannot
function without the host computer.
E-mail - An electronic mail message
sent from a host computer to a remote computer.
End User - Refers to the human
executing applications on the workstation.
Ethernet - A network protocol invented
by Xerox Corporation and developed jointly by
Xerox, Intel and Digital Equipment Corporation.
Ethernet networks use CSMA/CD and run over a
variety of cable types at 10 Mbps (megabits per
second).
Expansion Slot - Area in a computer
that accepts additional input/output boards to
increase the capability of the computer.
Fast Ethernet - A new Ethernet
standard that supports 100 Mbps using category 5
twisted pair or fiber optic cable.
Fiber Distributed Data Interface (FDDI)
- A network protocol that is used primarily to
interconnect two or more local area networks,
often over large distances.
Fiber Optic Cable - A cable,
consisting of a center glass core surrounded by
layers of plastic, that transmits data using
light rather than electricity. It has the
ability to carry more information over much
longer distances.
File Server - A computer connected to
the network that contains primary
files/applications and shares them as requested
with the other computers on the network. If the
file server is dedicated for that purpose only,
it is connected to a client/server network. An
example of a client/server network is Novell
Netware. All the computers connected to a
peer-to-peer network are capable of being the
file server. Two examples of peer-to-peer
networks are LANtastic and Windows for
Workgroups.
Firewall
- A
firewall is a part of a
computer system or network that
is designed to block
unauthorized access while
permitting authorized
communications. It is a device
or set of devices configured to
permit, deny,
encrypt,
decrypt, or
proxy all (in and out)
computer traffic between
different
security domains based upon
a set of rules and other
criteria.
Gigabit Ethernet - An Ethernet
protocol that raises the transmission rates to 1
Gbps (gigabits per second). It is primarily used
for a high speed backbone of a network.
Gigabyte (GB) - One billion bytes of
information. One thousand megabytes.1 gigabit =
10
9 = 1,000,000,000
bits (which is equal to 125
decimal
megabytes or 122 binary
mebibytes, as 8
bits equals one
byte)
.
The gigabit is closely
related to the
gibibit, which is
unambiguously equal to 2
30
bits = 1,073,741,824 bits.
Hub - A hardware device that contains
multiple independent but connected modules of
network and internetwork equipment. Hubs can be
active (where they repeat signals sent through
them) or passive (where they do not repeat but
merely split signals sent through them).
Infrared - Electromagnetic waves whose
frequency range is above that of microwaves, but
below that of the visible spectrum.
Intranet - Network internal to an
organization that uses Internet protocols.
Internet - A global network of
networks used to exchange information using the
TCP/IP protocol. It allows for electronic mail
and the accessing ad retrieval of information
from remote sources.
LAN (Local Area Network) - A network
connecting computers in a relatively small area
such as a building.
Linear Bus - A network topology in
which each node attaches directly to a common
cable.
LocalTalk - Apple Corporation
proprietary protocol that uses CSMA/CA media
access scheme and supports transmissions at
speeds of 230 Kbps (Kilobits per second).
MAN (Metropolitan Area Network) - A
network connecting computers over a large
geographical area, such as a city or school
district.
MAU (Multistation Access Unit) - A
Token Ring wiring hub.
Modem (Modulator/Demodulator) -
Devices that convert digital and analog signals.
Modems allow computer data (digital) to be
transmitted over voice-grade telephone lines
(analog).
Multiplexer - A device that allows
multiple logical signals to be transmitted
simultaneously across a single physical channel.
Network Modem - A modem connected to a
Local Area Network (LAN) that is accessible from
any workstation on the network.
Network Interface Card (NIC) - A board
that provides network communication capabilities
to and from a computer.
Network Operating System (NOS) -
Operating system designed to pass information
and communicate between more than one computer.
Examples include AppleShare, Novell NetWare, and
Windows NT Server.
Node - End point of a network
connection. Nodes include any device attached to
a network such as file servers, printers, or
workstations.
Node Devices - Any computer or
peripheral that is connected to the network.
PCMCIA - An expansion slot found in
many laptop computers.
Peer-to-Peer Network - A network in
which resources and files are shared without a
centralized management source.
Physical Topology - The physical
layout of the network; how the cables are
arranged; and how the computers are connected.
Point-to-Point - A direct link between
two objects in a network.
Ports - A connection point for a
cable.
Protocol -A formal description of a
set of rules and conventions that govern how
devices on a network exchange information.
Common protocols are:
-
IP (Internet Protocol)
-
UDP (User Datagram
Protocol)
-
TCP (Transmission
Control Protocol)
-
DHCP (Dynamic Host
Configuration Protocol)
-
HTTP (Hypertext Transfer
Protocol)
-
FTP (File Transfer
Protocol)
-
Telnet (Telnet Remote
Protocol)
-
SSH (Secure Shell Remote
Protocol)
-
POP3 (Post Office
Protocol 3)
-
SMTP (Simple Mail
Transfer Protocol)
-
IMAP (Internet Message
Access Protocol)
-
SOAP (Simple Object
Access Protocol)
-
PPP (Point-to-Point
Protocol)
RAID (Redundant Array of Inexpensive
Disks) - A configuration of multiple disks
designed to preserve data after a disk casualty.
RAM (Random Access Memory) - The
working memory of a computer where data and
programs are temporarily stored. RAM only holds
information when the computer is on.
Repeater - A device used in a network
to strengthen a signal as it is passed along the
network cable.
RJ-45 - Standard connectors used for
unshielded twisted-pair cable.
Router -A device that routes
information between interconnected networks. It
can select the best path to route a message, as
well as translate information from one network
to another. It is similar to a superintelligent
bridge.
SCSI (Small Computer Serial Interface)
- An interface controller that allows several
peripherals to be connected to the same port on
a computer.
Segment - Refers to a section of cable
on a network. In Ethernet networks, two types of
segments are defined. A populated or trunk
segment is a network cable that has one or more
nodes attached to it. A link segment is a cable
that connects a computer to an interconnecting
device, such as a repeater or concentrator, or
connects a interconnecting device to another
interconnecting device.
Sneaker-Net - Refers to a manual
method of sharing files in which a file is
copied from a computer to a floppy disk,
transported to a second computer by a person
physically walking (apparently wearing sneakers)
to the second computer, and manually
transferring the file from floppy disk to the
second computer.
Speed of Data Transfer - The rate at
which information travels through a network,
usually measured in megabits per second.
Star Topology
- LAN topology in which
each node on a network is connected directly to
a central network hub or concentrator.
Star-Wired Ring - Network topology
that connects network devices (such as computers
and printers) in a complete circle.
Tape Back-Up - Copying all the data
and programs of a computer system on magnetic
tape. On tape, data is stored sequentially. When
retrieving data, the tape is searched from the
beginning of tape until the data is found.
Terminator - A device that provides
electrical resistance at the end of a
transmission line. Its function is to absorb
signals on the line, thereby keeping them from
bouncing back and being received again by the
network.
Thicknet - A thick coaxial cable that
is used with a 10Base5 Ethernet LAN.
Thinnet - A thin coaxial cable that is
used with a 10Base2 Ethernet LAN.
Token - A special packet that contains
data and acts as a messenger or carrier between
each computer and device on a ring topology.
Each computer must wait for the messenger to
stop at its node before it can send data over
the network.
Token Ring - A network protocol
developed by IBM in which computers access the
network through token-passing. Usually uses a
star-wired ring topology.
Topology - There are two types of
topology: physical and logical. The physical
topology of a network refers to the
configuration of cables, computers, and other
peripherals. Logical topology is the method used
to pass the information between workstations.
Issues involving logical topologies are
discussed on the Protocol chapter
Transceiver (Transmitter/Receiver) - A
Device that receives and sends signals over a
medium. In networks, it is generally used to
allow for the connection between two different
types of cable connectors, such as AUI and
RJ-45.
Tree Topology - LAN topology similar
to linear bus topology, except that tree
networks can contain branches with multiple
nodes.
Twisted Pair
- Network cabling that
consists of four pairs of wires that are
manufactured with the wires twisted to certain
specifications. Available in shielded and
unshielded versions.
USB (Universal Serial Bus) Port
- A
hardware interface for low-speed peripherals
such as the keyboard, mouse, joystick, scanner,
printer, and telephony devices.
WAN (Wide Area Network) - A network
connecting computers within very large areas,
such as states, countries, and the world.
Workgroup - A collection of
workstations and servers on a LAN that are
designated to communicate and exchange data with
one another.
Workstation -
A computer connected to a network at which users
interact with software stored on the network.